This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: RAM Images on AT91SAM7s256
- From: "Alois Z." <alois at gmx dot at>
- To: ecos-discuss at sources dot redhat dot com
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Mon, 28 Jan 2008 18:06:11 +0100
- Subject: Re: [ECOS] RAM Images on AT91SAM7s256
- References: <20080128160738.64350@gmx.net> <20080128164654.GC10795@lunn.ch>
>
> With only 64Kbytes of RAM, you will be very limited to what you can
> do. I strongly suggest you get a JTAG debugger which can set hardware
> breakpoints. You can then run your application from ROM and single
> step, set a couple of breakpoints etc.
>
I know, but for first test 64k are quite fine. And for my first tests I like to be as none invasive as possible. The board is the mindstorms NXT board and to have JTAG debugging I would need to disassamble the brick and solder a connector in. However I can image that I will not come far without debugging support.
>
> How are you going to get this image into RAM?
I thought of useing sam-ba for loading and starting images.
>
> You also need to make sure that RAM is mapped to address 0x0 as well
> as 0x00200000. I know ROM startup does this, but i think RAM startup
> probably does not.
Is this necessary for the vectors to be at the right place?
--
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss