This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: eCos and RedBoot support for HP Ipaq
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Jérémy Alles <jeremy dot alles at orange-ftgroup dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 05 Mar 2008 04:01:58 -0700
- Subject: Re: [ECOS] eCos and RedBoot support for HP Ipaq
- References: <200803051050.m25AoBC8008886@smtp.silicomp.fr>
Please keep your relies on the eCos mailing list so that all benefit.
Jérémy Alles wrote:
Thank you for that information. The Ipaq seems to be a good choice for me.
In RedBoot's guide, I read that I also need a compact flash Ethernet card,
but there is no reference about this device? Do you know which device is
supported?
Socket Communications LP/E - a fairly old 10Mb PCMCIA card
-----Message d'origine-----
De : Gary Thomas [mailto:gary@mlbassoc.com]
Envoyé : mercredi 5 mars 2008 11:43
À : Jérémy Alles
Cc : ecos-discuss@ecos.sourceware.org
Objet : Re: [ECOS] eCos and RedBoot support for HP Ipaq
Jérémy Alles wrote:
Hi,
I saw on eCos website that the HP Ipaq is supported by both eCos and
Redboot. I would like to know if there are special requirements on the
Ipaq
model number or if only the CPU (Strong ARM SA-1110) is important.
The iPAQ support only runs on the HP3600 model. Other models are quite
different (in the details).
There are other SA1100 based platforms that eCos will run on as well.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss