This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: how to enable cyg_thread_delay() to work
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Sun Yanfei <Yanfei dot Sun at freescale dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 13 Jun 2008 06:21:39 -0600
- Subject: [ECOS] Re: how to enable cyg_thread_delay() to work
- References: <E51FF5BEC8038E4D93ACAA0B79BF98DE5E4387@zch01exm27.fsl.freescale.net>
Sun Yanfei wrote:
Hi Gary,
I'm now trying to enable scheduler to work in eCos, but system
halted when invoking cyg_thread_delay(). for thread never wake up
because counter did not increase to trigger alarm. as you know , counter
changed with ticks, ticks were generated by interrupt of RTC?
Note: questions like this belong on the eCos discussion list (CC'd).
Private email support from MLB Associates is only available
with a support contract.
What's the target platform?
Have you run the standard eCos test suite on this system?
Perhaps showing your code would be useful.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss