This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Network debuggers & diag_printf
- From: "Rob Duncan" <rob dot duncan at designmagnitude dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 4 Jul 2008 11:18:33 -0700
- Subject: Re: [ECOS] Network debuggers & diag_printf
- References: <486E42E6.2070905@hasar.com> <d13da2ba633b28b884ee23cf940239ad@tepkom.ru> <486E64E8.6020903@hasar.com>
Eduardo,
On 7/4/08, Eduardo Sabaj <esabaj@hasar.com> wrote:
> BOOTP[eth0] op: REPLY
> htype: Ethernet
> hlen: 6
> hops: 0
> xid: 0x0
> secs: 0
> flags: 0x0
> hw_addr: 00:1b:eb:74:00:dd
> client IP: 192.0.2.235
> my IP: 192.0.2.235
> server IP: 192.0.110.232
> gateway IP: 192.0.110.232
> options:
> subnet mask: 255.255.0.0
> IP broadcast: 192.0.255.255
> gateway: 192.0.110.232
>
> These lines are printed using diag_printf () in module bootp_support.c,
> function show_bootp(). Instead of commenting the code I would like to know
> if there is a way to disable the diag_printf () function, at least for the
> code related to the network settings.
Try setting the CYGHWR_NET_DRIVER_ETH0_BOOTP_SHOW option to 0.
Rob.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss