Re: [ECOS] jffs2 filesystem with redboot

["Tiju Jacob" <jacobtiju at gmail dot com>]

Hi Gary,

After redboot boots thriugh nor, i think we can change the boot to
nand and restart/boot through nand. rit?
Could u please forward me the archives where these were discussed? I
tried searching but cud'nt find any.

Thanks,
TJ

On Thu, Jul 24, 2008 at 10:41 PM, Gary Thomas <gary@mlbassoc.com> wrote:
> Tiju Jacob wrote:
>>
>> It is a mx27 ADS based board. The redboot/eCos sources were given by
>> Freescale.
>
> Please keep replies on the eCos list so that all may benefit.
>
> AFAIK, that port only supports the NOR FLASH on the board.  If you want
> to add NAND, you'll need to write the drivers, etc, yourself.  There
> has been much discussion on this topic of late; check the archives.
>
>> On Thu, Jul 24, 2008 at 8:56 PM, Gary Thomas <gary@mlbassoc.com> wrote:
>>>
>>> Tiju Jacob wrote:
>>>>
>>>> Hi all,
>>>>
>>>> I have a freescale based development board. I am trying to boot from
>>>> nand using redboot. My queries are:
>>>>
>>>> 1. How would I enable the nand flash in redboot?
>>>> 2. How to integrate jffs2 filesystem with redboot?
>>>> 3. If integrated will I be able to write, read, erase files in the nand
>>>> flash?
>>>> 4. How could I enable the support for these functionalities?
>>>>
>>> What kind of Freescale development board is it?
>>> Where did you get the RedBoot/eCos sources (if not from the public CVS
>>> tree)?
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss