This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: linking a program for download to at91sam7x-resident redboot
- From: John Dallaway <john at dallaway dot org dot uk>
- To: Bob dot Brusa at gmail dot com
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 20 Mar 2009 15:29:40 +0000
- Subject: [ECOS] Re: linking a program for download to at91sam7x-resident redboot
- References: <op.uq3inar6keg3uf@localhost>
Hi Robert
Robert Brusa wrote:
> I have configured, linked and downloaded redboot into my at91sam7x
> board. Its a minimum redboot, supporting only ser0 and ser1 for direct
> download into flash.
>
> Then I wanted to change my little hello-program by linking it in such a
> way to go above redboot in the flash. Actually I placed it at 0x00120000
> - far above redboot - by editing the ecos-provided target.ld-file. The
> memory-statement in this file now reads like this:
>
> MEMORY
> {
> ram : ORIGIN = 0x00200000, LENGTH = 0x20000
> rom : ORIGIN = 0x00120000, LENGTH = 0x80000
> }
>
> However, when running the linker, it produces errors and reports vectors
> etc. to be out of rom range. Correct, but I think I do not need these
> vectors here. What else do I have to change in the loader file (or
> elswhere) to get a linked program to be downloadable to/with redboot
> where it will be launched by a cor. redboot command (or a script later
> on)? Thanks for help.
You should be able to specify the desired address of your eCos ROM
startup application image via the CYGNUM_HAL_ARM_AT91_IMAGE_ADDRESS
option which appears to have been implemented for exactly the purpose
you describe.
John Dallaway
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss