This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: running test cases
Hello again
I am running Umbunto on a pc through VM Virtual box and targetting the
STM3120E dev board.
I have successfuly built and downloaded RedBoot using St's demo flash
loader. I have verified that this is running by connecting hyperterminal to
the dev board and seeing the RedBoot gdb prompt.
I have then performed a default build of eCos for the dev board and then try
to run gdb from the command line in the virtual machine.
The command used to invoke gdb was
arm-eabi-gdb -nw DevBoard_install/tests/kernel/v3_0/tests/bin_sem0
at the gdb prompt I type
set remotebaud 38400
target remote /dev/ttyS0
and get the output below
I have tried various builds with different baud rates.
Any help would be greatly appreciated
Graham
Gary Thomas wrote:
>
> grahamlab wrote:
>> Hello everyone
>>
>> When I try to run gdb I am seeing the following
>>
>> (gdb) target remote /dev/ttyS0
>> Remote debugging using /dev/ttyS0
>> 0x08003b3a in ?? ()
>> (gdb) load
>> Loading section .rom_vectors, size 0x8 lma 0x68008000
>> Loading section .ARM.exidx, size 0x10 lma 0x68008008
>> Loading section .text, size 0x4330 lma 0x68008018
>> Ignoring packet error, continuing...
>>
>> can anyone tell me what I am doing wrong
>
> Pretty hard to say since we've no idea what platform you're using :-(
>
> Most likely cause is trying to load code into RAM that RedBoot
> (or GDB stubs) uses.
>
> Provide some [real] details and we might be able to help.
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
>
--
View this message in context: http://www.nabble.com/running-test-cases-tp22873616p22880984.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss