This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Re: SNMP lockup
On Fri, May 08, 2009 at 10:38:24PM +0000, Grant Edwards wrote:
> On 2009-05-08, Sergei Gavrikov <sergei.gavrikov@gmail.com> wrote:
>
> > If your guess is right...
>
> It's not a guess.
>
> The problem occurs when cyg_snmp_get_if() is called with if_num <= 0.
>
> The loop takes 1-2 minutes to loop from -1, -2, back to 0,
> causing the SNMP management thread to lock out all lower
> priority threads while it's doing so.
Then fix it.
>
> > Can you walk here with/without tweaks when if_num=0
> >
> > repo/devo/ecos/packages/net/snmp/agent/current/src/mibgroup/mibII/interfaces.c:398
[snip]
> I'm surprised nobody else has run into this. I'm told all our
> customers who have HP or Cisco SNMP managers have had to
> disable SNMP support in our products to keep them from locking
> up every few minutes.
I was just googling +'ifPhysAddress.0'
It seems you are not alone :-)
http://mtsc.moxa.com:8888/Software/DN/NPort/Firmware/NPort%205000/NPort%205600/ver3.2/VERSION.TXT
<quote>
ver3.1 (2006/05/16)
3. Fixed the problem that querying NPort by SNMP Software would cause NPort stop replying ethernet packet
while querying "GET iso.3.6.1.2.1.2.2.1.6.0", which is resolved as
"GET iso.org.dod.internet.mgmt.mib-2.interface.ifTable.ifEntry.ifPhysAddress.0".
</quote>
UCD-SNMP had a lot of holes. eCos UCD-SNMP implementation has even more
holes :-(
Good luck!
Sergei
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss