This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Simple serial comms
- From: Simon Kallweit <simon dot kallweit at intefo dot ch>
- To: grahamlab <graham dot labdon at cranems dot co dot uk>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 02 Jul 2009 15:29:24 +0200
- Subject: Re: [ECOS] Simple serial comms
- References: <24306125.post@talk.nabble.com>
grahamlab wrote:
Hello everyone
I am developing an ecos application using the STM3210E dev kit.
I want to do some serial comms but cannot receive more than 128 bytes.
I have tested this program using minicom to send the bytes
You may have to reconfigure the rx/tx buffer length for the serial. The
default is 128 bytes. The following configuration options are used to
configure the buffer size:
CYGNUM_IO_SERIAL_CORTEXM_STM32_SERIAL0_BUFSIZE
CYGNUM_IO_SERIAL_CORTEXM_STM32_SERIAL1_BUFSIZE
CYGNUM_IO_SERIAL_CORTEXM_STM32_SERIAL2_BUFSIZE
CYGNUM_IO_SERIAL_CORTEXM_STM32_SERIAL3_BUFSIZE
CYGNUM_IO_SERIAL_CORTEXM_STM32_SERIAL4_BUFSIZE
Simon
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss