This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: Simple serial comms

From: Nick Garnett <nickg at ecoscentric dot com>
To: grahamlab <graham dot labdon at cranems dot co dot uk>
Cc: ecos-discuss at ecos dot sourceware dot org
Date: 02 Jul 2009 16:36:05 +0100
Subject: Re: [ECOS] Simple serial comms
References: <24306125.post@talk.nabble.com> <m37hyrjh7g.fsf@xl5.calivar.com> <24307911.post@talk.nabble.com>

grahamlab <graham.labdon@cranems.co.uk> writes:

> 
> >How are you sending the bytes?
> I can also make my program behave like this. The problen arises when I send
> the data in a chunk > 128 bytes - either using minicom or another program.

In that case I suspect that enabling flow control might be
necessary. If you can use harware flow control that would be best,
otherwise use software flow control.


-- 
Nick Garnett                                       eCos Kernel Architect
eCosCentric Limited    http://www.eCosCentric.com       The eCos experts
Barnwell House, Barnwell Drive, Cambridge, UK.      Tel: +44 1223 245571
Registered in England and Wales:                         Reg No: 4422071


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Follow-Ups:
- Re: Simple serial comms
  - From: grahamlab

References:
- Simple serial comms
  - From: grahamlab
- Re: Simple serial comms
  - From: Nick Garnett
- Re: Simple serial comms
  - From: grahamlab

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]