This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

LPC2XXX watchdog feeds and interrupts


Hi All,
I using an ARM 7 (LPC2212) based on an eCosCentric build. It appears that
watchdog feeds are done with interrupts enabled yet the NXP manual
warns against leaving interrupts enabled during a feed sequence (and I'm
pretty sure I've seen the consequences).
Firstly, have I missed something? Are interrupts disabled and I just don't
see where when I call watchdog_reset() 
OR
should I be adding cyg_interrupt_disable() and cyg_interrupt_enable() calls
around the feed sequence in watchdog_lpc2xxx.cxx

Thanks			...Laurie:{)



-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]