This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Does eCOS 2.0/3.0 support CFI ?
- From: "Ramgopal Kota" <rkota at broadcom dot com>
- To: "ecos-discuss at ecos dot sourceware dot org" <ecos-discuss at ecos dot sourceware dot org>
- Cc: "Raju (Narasimha Raju) Chinta" <narasimha dot chinta at broadcom dot com>, "Sindhu Bharathi Chintakrindi" <chsindhu at broadcom dot com>
- Date: Fri, 11 Dec 2009 02:28:13 -0800
- Subject: [ECOS] Does eCOS 2.0/3.0 support CFI ?
- References: <4AB6DC5340C94AFEB5AB2B9A3D00CF98@masahiro> <4B1F7216.60104@ecoscentric.com>
Hi,
Does eCOS support CFI Flash interface ?
We have desgined a board based on spansion flash with 8MBytes.Due to procument issues, the team wants to use non-uniform sectors parts also.
Thanks & Regards,
Ramgopal Kota
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Ross Younger
Sent: Wednesday, December 09, 2009 3:17 PM
To: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] Re: Can not compile API file
m mariga wrote:
>> PPOUT.C
It looks to me like this file has not been selected for compilation
because the build system is case sensitive: I suspect that if you rename
it to PPOUT.c it should compile.
Ross
--
eCosCentric Ltd, Barnwell House, Barnwell Drive, Cambridge CB5 8UU, UK
Registered in England no. 4422071. www.ecoscentric.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss