This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: about redboot3
- From: Shu Higashiyama <higashi at jiyu-sha dot co dot jp>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Tue, 16 Feb 2010 18:49:20 +0900
- Subject: Re: [ECOS] about redboot3
Thank you Mr.Sergei and All.
LPC2468 OEM Board /embeddedartists is used.
>> The above-mentioned operated by redboot(without FLASH support) that
>> operated normally. ID of Flash-Rom was able to be read without
>> hanging up by using iopeek and iopoke.
>Are the read ID codes expected values?
yes.
The ID code was read referring to the procedure of datasheet of flash-rom.
>> If Flash-Rom cannot be recognized, cannot Ecos be loaded?
>>Fortunately, your Target has a lot of RAM and you can build the eCos
>>tests for RAM Startup. Default startup type for your target is ROM
>>startup, so apply one import (see the below). Then try to upload and
>>run those tests via serial port using the built RedBoot (without FLASH
>>support) to continue a learing of eCos:
>ecosconfig new <target>
>cat >ram_startup.ecm<<EOF
>cdl_component CYG_HAL_STARTUP {
>user_value RAM
>};
>EOF
>ecosconfig import ram_startup.ecm
>ecosconfig tree
>make && make tests
>If all passed smoothly, you find all tests under install/tests directory.
Smoothly and is normal.
There is install/tests directory.
Please teach the procedure afterwards.
I'm sorry English ..poor...
Please continue your favors toward continuation.
I am sorry my best regards in a rudimentary question because it is a beginner.
--------------------------------------------
Shu Higashiyama
jyu-sha Corp.
2-20-19-609,Teraya,Tsurumi-ku,Yokohama-city,Japan
Tel 81-45-576-0976
Fax 81-45-576-0976
E-Mail aeb05134@nifty.com
higashi@jiyu-sha.co.jp
URL http://homepage1.nifty.com/jiyu-sha/
http://www.jiyu-sha.co.jp
---------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss