This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Define Flash partition for WinCE storage
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Stefano Mora <smora at eos dot pr dot it>
- Cc: "'ecos-discuss at ecos dot sourceware dot org'" <ecos-discuss at ecos dot sourceware dot org>
- Date: Tue, 16 Mar 2010 05:59:22 -0600
- Subject: Re: [ECOS] Define Flash partition for WinCE storage
- References: <70924D2F9956B6428BA0FDFD4FFA875C033F43A62A39@SRVEOS.eos>
On 03/16/2010 05:55 AM, Stefano Mora wrote:
Hi all,
I have a board with RedBoot + WinCE.
What kind of a board is this?
I defined a Flash partition for wince and a 64MB partition for storage.
WinCE mounts correctly the 64MB storage partition.
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0x00000000 0x00000000 0x00040000 0x00000000
wince 0x00040000 0x80100000 0x01F00000 0xFFFFFFFF
storage 0x01F40000 0x82000000 0x04000000 0xFFFFFFFF
FIS directory 0x07F60000 0x07F60000 0x0001F000 0x00000000
RedBoot config 0x07F7F000 0x07F7F000 0x00001000 0x00000000
RedBoot>
How can i define a 1GB Storage size?
You'd have to have a 1GB device on your hardware platform - do you?
Do I need to define a RAM (Mem addr) size with the same size of the storage area?? I have not so much RAM !?!?!
No these are not related. The 'Mem addr' is simply the RAM address
that RedBoot will load an image into by default (when the -b option
is not used with 'fis load')
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss