This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: printf/gets/etc not working

From: Slide <slide dot o dot mix at gmail dot com>
To: Ilija Kocho <ilijak at siva dot com dot mk>
Cc: ecos-discuss at ecos dot sourceware dot org
Date: Sat, 14 Aug 2010 07:00:00 -0700
Subject: Re: [ECOS] printf/gets/etc not working
References: <AANLkTinUcLgR4R2izhCLJJQggCv7rsqbKNJqvQL86WzX@mail.gmail.com> <4C667375.6000703@siva.com.mk>

On Sat, Aug 14, 2010 at 3:44 AM, Ilija Kocho <ilijak@siva.com.mk> wrote:
> Check if hardware serial ports (such as /dev/ser0) and TTY-mode devices
> (such as /dev/tty0) are included.
> In configtool:
> ? ?I/O sub-system -> Serial device drivers +-> Hardware serial device
> drivers
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?+-> TTY-mode serial device
> drivers
> // Ilija
>


I do have TTY-mode devices enabled, but I thought that if I enabled
tty0 it would conflict with the ttydiag or the haldiag devices that
seem to be created.

Thanks,

slide

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Follow-Ups:
- Re: printf/gets/etc not working
  - From: Ilija Kocho

References:
- printf/gets/etc not working
  - From: Slide
- Re: printf/gets/etc not working
  - From: Ilija Kocho

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]