This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re dboot + Flash driver for 2k page size
- From: lux_cnis <luxiang527 at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Tue, 7 Dec 2010 08:35:05 -0800 (PST)
- Subject: [ECOS] Re[ECOS] dboot + Flash driver for 2k page size
Hi all,
I am a newbie in ecos. I am working to reboot my arm board TS-7250 from the
flash on my board, which holds 128M flash and 64M RAM.
Now, I can use a serial blaster to boot into the redboot prompt. But I found
that the compiled redboot can not work with my flash. My flash is SAMSUNG
K9F1G08U0B, whose page size is 2K. Therefore, my redboot can not recognize
the flash. When I try to "fis write" the bootrom file into the flash, the
error information is as follows:
Invalid FLASH address 0x60000000: FLASH sub-system not initialized
valid range is 0x00000000 - 0x00000000
When I typed in "version" under redboot prompt, the information is as
follows:
RAM: 0x00000000 - 0x02000000 [0x00053750 - 0x01ffd000] available
FLASH: 0x00000000 - 0x00000001, 0 blocks of 0x00000000 bytes each.
So, could anybody share your redboot with me to fix this problem about
enabling nand 2k flash? Thank you so much.
Best Regards,
Lux
--
View this message in context: http://old.nabble.com/Redboot-%2B-Flash-driver-for-2k-page-size-tp30398030p30398030.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss