This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Working with 2 separate eCos installations
[please, do not top-post]
On Tue, 1 Feb 2011, Elad Yosef wrote:
> I'm just using the ecosenv.sh that assumed to do it.
> I also use other build tools, so I have to change the build-tools as
> well.
>
> I don't want to switch it manually every time.
AFAIK, on Linux configtool saves settings of the latest session and I
hope it reads it on start.
% ls ~/.eCosConfigTool
/home/sg/.eCosConfigTool
% grep Dir= ~/.eCosConfigTool
UserToolsDir=/bin
BuildToolsDir=/opt/ecos/gnutools
RepositoryDir=/home/sg/repo/devo/ecos
I hope the same in Cygwin... I think that a bit of scripting would get
you some automation.
Sergei
> Elad
>
>
>
> Lars Poeschel <larsi@wh2.tu-dresden.de> wrote:
> > Am 01.02.2011 um 09:34 schrieb Elad Yosef:
> >
> >> Hi,
> >> I have 2 work-spaces for RedBoot/eCos The first installed one was
> >> for RedBoot( i have fully installed eCos and later removed unused
> >> things)
> >>
> >> The second installed for the eCos Application (regular full eCos
> >> install + my platform stuff)
> >>
> >> When I'm switching between the 2 work-spaces, I invoke the
> >> configtool from inside the workspace, But the repository and the
> >> build tool paths are not switching!
> >
> > As far as I know you only have to switch the ECOS_REPOSITORY
> > environment variable. Have you done that ?
> >
> > Regards,
> > Lars
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss