This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Redboot for FSL TWRK70F120M with Linux kernel booting
On Wed, Mar 14, 2012 at 4:27 PM, Ilija Kocho <ilijak@siva.com.mk> wrote:
>
> I think you don't need to add dram region but simply declare dram as
> main ram.
> I think it will be easiest for you if you use TWR-K60N512-FXM target as
> example. (added recently so you may need to update/checkout eCos). It is
> very similar to what you probably need - only with FlexBus external
> memory instead of DDR. Probably in addition to initialization code you
> only need to change base address and size of RAM and it should work.
>
> I hope this helps. Looking forward to your feedback.
Hi Ilija and all,
I have replace DRAM as main RAM as your K60 fxm and it is OK
currently. But I have another problem about ether net :).
With the same situation, when I use internal RAM the ethernet can get
BOOTP with DHCP ip immediately with booting, but when I use DRAM as
main RAM the board can't get BOOTP information, it said "networking is
not available". Do you know where is the reason? Thanks so much.
>
> Ilija
>
Thanks & Regards,
Linh Nguyen
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss