This is the mail archive of the
ecos-maintainers@sourceware.org
mailing list for the eCos project.
Re: Support query
- From: Andrew Lunn <andrew dot lunn at ascom dot ch>
- To: "Igor B. Poretsky" <master at goga dot energo dot ru>
- Cc: ecos-maintainers at sources dot redhat dot com
- Date: Mon, 12 Feb 2007 14:44:23 +0100
- Subject: Re: Support query
- References: <E1HGT7a-0002vp-00@Goga>
On Mon, Feb 12, 2007 at 07:48:58AM +0300, Igor B. Poretsky wrote:
> Hello!
Please use the ecos-discuss mailling list.
> I tried to use eCos on the AT91SAM7S-ek board, but failed somehow. I
> dealt with the snapshot version of January 7 2007.
>
> At first I've compiled RedBoot (quite successfully) and programmed it
> into the board's flash memory.
I would not use RedBoot with the AT91SAM7 series. These devices do not
have enough flash/RAM to make proper use of Redboot. It is much better
to just use JTAG and build ROM eCos applications. That is why there
are no RAM memory configuration files. I don't think i makes sense to
run eCos in RAM.
Andrew