This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Re: at91 cdl refactoring , settable baudrate from redboot
- From: Thomas Koeller <thomas dot koeller at baslerweb dot com>
- To: Jonathan Larmour <jifl at eCosCentric dot com>,Jani Monoses <jani at iv dot ro>
- Cc: ecos-patches at sources dot redhat dot com
- Date: Mon, 8 Mar 2004 13:17:24 +0100
- Subject: Re: at91 cdl refactoring , settable baudrate from redboot
- Organization: Basler AG
- References: <20040212162319.575dd4a4.jani@iv.ro> <40369581.1070209@eCosCentric.com>
Jonathan Larmour wrote:
>
> I'll hold off reverting the relevant parts of the patch (i.e. return bits
> back to the platform HALs) straight away so people have a chance to comment.
Jonathan,
do you think you need much longer to make a decision as to whether this patch
should be reverted or not? As I wrote earlier, I have a couple of platform
HAL packages that would need to be adopted if this change were to stay, but
of course I do not want to do that if things are likely to be changed back
later. But if I dont, I cannot update my repository.
FWIW, I agree with you that most of the cdl options in question should be in
the platfrom HAl for maximum flexibility. The platform HAL packages I am
maintaining are not exactly like one of the evaluation boards. Some of them
have additional I/O channels besides the two serial ports, and they do in
fact use a special startup mode, which is a variant of the ROMRAM mode that
leaves .rodata in rom.
tk
--
--------------------------------------------------
Thomas Koeller, Software Development
Basler Vision Technologies
An der Strusbek 60-62
22926 Ahrensburg
Germany
Tel +49 (4102) 463-390
Fax +49 (4102) 463-46390
mailto:thomas.koeller@baslerweb.com
http://www.baslerweb.com
==============================