This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: kernel dsr handling new option


Hi Uwe

I placed eSCI driver in devs/serial/freescale/esci (I created freescale
dir for freescale's serial devices employed on various fs architecture
chips).

There is a possibility for us to get a job that will need can. In that
case I'll look for your driver and do same for can (devs/can/flexcan).
I'll send you a note.

Regards
Ilija

Uwe Kindler wrote:
> Hello Ilija,
>
> > Making multiple drivers for same device is not a good practice.
>
> The FlexCAN device driver is part of the official eCos CVS since may
> 2005. It is in the devs/can/m68k/mcf52xx directory. I know that the
> FlexCAN module is not only part of the Coldfire family but it also
> implemented in other Freescale microcontrollers. It should be no
> proplem for another developer to port this driver for other Freescale
> processors. If someone will do a port for another Freescale product
> then maybe we should think about moving the driver into a separate
> directory and make it common for all Freescale products that use
> FlexCAN module.
>
>
> Best Regards
>
>
> Uwe Kindler
> Software Engineering
>
> -- 
>
> cetoni GmbH
> Am Wiesenring 6
> D-07554 Korbussen
>
> Tel.: +49 (0) 36602 338 28
> Fax:  +49 (0) 36602 338 11
> uwe.kindler@cetoni.de
> www.cetoni.de
>


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]