This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: EB40a reset code fix


On 8/14/06, Andrew Lunn <andrew@lunn.ch> wrote:
On Mon, Aug 14, 2006 at 02:54:02PM +0200, ?yvind Harboe wrote:
> Reset external circuits as well....

ChangeLog?

I'll write it up as soon as the rest of the issues are resolved.


I would also remove the refernce to flash. It might be flash for you,
but it could be some other device on somebody else board.

Note that the onboard flash of the AT91R40162 is actually a seperate chip in the same package. Could someone with the requisite hardware experience check the schematics?

Is the external reset a dedicated pin? Or can it also be used as a
GPIO? If its a GPIO as well, then you should add CDL to control this.

Don't know.



-- Øyvind Harboe http://www.zylin.com


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]