This is the mail archive of the
ecos-patches@sourceware.org
mailing list for the eCos project.
Re: Building ConfigTool with GCC 4.x.x
- From: Gary Thomas <gary at mlbassoc dot com>
- To: John Dallaway <jld at ecoscentric dot com>
- Cc: ecos-patches at ecos dot sourceware dot org
- Date: Thu, 25 Oct 2007 08:24:55 -0600
- Subject: Re: Building ConfigTool with GCC 4.x.x
- References: <472090F1.4040002@ecoscentric.com>
John Dallaway wrote:
> Hi Gary
>
> Your configtool-gcc-4.x.x.patch is fine. Feel free to check it in
> (without the commented out class names) or I can do it if you prefer.
Thanks, I'll take care of it.
> I do not need your configtool-gcc-3.4.x.patch to build configtool with
> GCC 4.1.1 on Linux. Perhaps you have other changes in your source code
> which require this?
I don't think so, but I'll check. I had that patch around for
quite a while - I'll see if it's still necessary.
Thanks again
> -------- Original Message --------
> Subject: Building ConfigTool with GCC 4.x.x
> Date: Wed, 24 Oct 2007 06:55:45 -0600
> From: Gary Thomas <gary@mlbassoc.com>
> To: eCos patches <ecos-patches@ecos.sourceware.org>
> Newsgroups: gmane.os.ecos.patches
>
> I just tried to build the config tool using GCC 4.2.1 and
> had some problems.
>
> The changes I needed are attached. I'm not a C++ guru, so
> please comment on them (I purposefully left the problem
> sections in comments) and let me know the best way to fix
> it. The tool runs fine with the changes I made.
>
> Note: there are two changes here. One I previously found when
> building with GCC-3.4.x and the latest one which is necessary
> when using GCC-4.2.x
>
> Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------