This is the mail archive of the
ecos-patches@sourceware.org
mailing list for the eCos project.
Add dataflash to ecos.db
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: eCos Patches List <ecos-patches at ecos dot sourceware dot org>
- Date: Tue, 18 Nov 2008 13:44:13 +0000
- Subject: Add dataflash to ecos.db
- Openpgp: id=A5FB74E6
I accidentally forgot the dataflash driver so see the attached patch. I
also may as well switch the synthetic target to the v2 driver. At some
point we'll need to consider retiring the v1 driver. It can be now if
people don't mind.
Obviously there's plenty of scope for people to be switching their own
favourite targets to the am29xxxxx/strata v2 flash drivers, and I encourage
them to submit patches to do so!
Jifl
--
eCosCentric Limited http://www.eCosCentric.com/ The eCos experts
Barnwell House, Barnwell Drive, Cambridge, UK. Tel: +44 1223 245571
Registered in England and Wales: Reg No 4422071.
------["Si fractum non sit, noli id reficere"]------ Opinions==mine
Index: ChangeLog
===================================================================
RCS file: /cvs/ecos/ecos/packages/ChangeLog,v
retrieving revision 1.197
diff -u -5 -p -r1.197 ChangeLog
--- ChangeLog 18 Nov 2008 01:28:11 -0000 1.197
+++ ChangeLog 18 Nov 2008 13:42:23 -0000
@@ -1,5 +1,11 @@
+2008-11-18 Jonathan Larmour <jifl@eCosCentric.com>
+
+ * ecos.db: Add Atmel dataflash package record, accidentally
+ omitted from 2008-11-16 changes.
+ Switch synthetic target to use v2 synth flash driver.
+
2008-11-16 Jonathan Larmour <jifl@eCosCentric.com>
* ecos.db: Use v2 drivers for adder/adderII and IXDP425.
2008-11-16 Jonathan Larmour <jifl@eCosCentric.com>
Index: ecos.db
===================================================================
RCS file: /cvs/ecos/ecos/packages/ecos.db,v
retrieving revision 1.183
diff -u -5 -p -r1.183 ecos.db
--- ecos.db 18 Nov 2008 01:28:11 -0000 1.183
+++ ecos.db 18 Nov 2008 13:42:24 -0000
@@ -246,10 +246,18 @@ package CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
description "
This package contains hardware support for Atmel AT49xxxx
flash memory devices."
}
+package CYGPKG_DEVS_FLASH_ATMEL_DATAFLASH {
+ alias { "Atmel DataFlash support" flash_dataflash dataflash }
+ directory devs/flash/atmel/dataflash
+ script devs_flash_atmel_dataflash.cdl
+ hardware
+ description "This package contains hardware support for Atmel DataFlash."
+}
+
package CYGPKG_DEVS_FLASH_ARM_PID {
alias { "Support for flash memory on ARM/PID board" flash_arm_pid }
directory devs/flash/arm/pid
script flash_arm_pid.cdl
hardware
@@ -5529,11 +5537,11 @@ target pc_usb_d12 {
# Synthetic targets.
target linux {
alias { "Linux synthetic target" i386linux }
packages { CYGPKG_HAL_SYNTH
CYGPKG_HAL_SYNTH_I386
- CYGPKG_DEVS_FLASH_SYNTH
+ CYGPKG_DEVS_FLASH_SYNTH_V2
CYGPKG_DEVS_ETH_ECOSYNTH
CYGPKG_DEVS_WATCHDOG_SYNTH
CYGPKG_DEVS_WALLCLOCK_SYNTH
CYGPKG_DEVS_FRAMEBUF_SYNTH
}