This is the mail archive of the
ecos-patches@sourceware.org
mailing list for the eCos project.
Re: eCos uSTL 1.3 port for review
- From: cetoni GmbH - Uwe Kindler <uwe dot kindler at cetoni dot de>
- To: Sergei Gavrikov <sergei dot gavrikov at gmail dot com>
- Cc: ecos-patches at sourceware dot org, John Dallaway <john at dallaway dot org dot uk>
- Date: Thu, 06 Aug 2009 14:30:03 +0200
- Subject: Re: eCos uSTL 1.3 port for review
- References: <4A7A94D0.2010201@cetoni.de> <20090806122020.GA12099@sg-ubuntu.local>
Hello Sergei,
> B) Unfortunately, I got SIGSEG in vsnprintf(). It seems, I should
> investigate more time for this issue, may be I missed something.
>
> Had you success with uSTL on synthetic target? All tests I built as
>
> ecosconfig new <target> ustl
>
> Once again, thank you for this package.
>
> Kind regards,
>
> Sergei
thank you very much for testing this package. Unfortunately I do not
have a running linux system here and have never used the synthetic
target before. So I can test uSTL only with arm-eabi toolchain.
It would be really great, If you could investigate a little bit more,
what causes the SIGSEG for synthetic target. Would you be so kind to run
the new snprintf_c99.c test on synthetic target when C99 compliance
activated to check if my vfnprintf() patch is working properly?
This would be really great.
If there would be a preconfigured VM linux image available on the eCos
homapage with all tools installed and a working synthetic target I would
immediatelly start testing ;O)
Kind regards, Uwe