This is the mail archive of the
ecos-patches@sourceware.org
mailing list for the eCos project.
[Bug 1001291] New HAL for Cortex-M3 Smartfusion device
- From: bugzilla-daemon at bugs dot ecos dot sourceware dot org
- To: ecos-patches at ecos dot sourceware dot org
- Date: Sun, 12 Feb 2012 10:16:36 +0000
- Subject: [Bug 1001291] New HAL for Cortex-M3 Smartfusion device
- Auto-submitted: auto-generated
- References: <bug-1001291-104@http.bugs.ecos.sourceware.org/>
Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001291
--- Comment #46 from Christophe Coutand <ecos@hotmail.co.uk> 2012-02-12 10:16:28 GMT ---
Hi Ilija,
I will check again the status of the new disclaimer and revert to you.
However, I would like to fix Bug 1001449 first. I see in your attachment (Flash
driver SST25XX SPI tests 120206) from Bug 1001450
that you have defined CYGNUM_DEVS_FLASH_SPI_SS25XX_MAP_ADDR directly in the
test case (flash_sst25xx_test.c), instead of spreading
CYGNUM_DEVS_FLASH_SPI_SST25XX_DEV0_MAP_ADDR.
In my proposal (1001449), I suggested to have a platform specific include in
the test case C file that provides the configuration of the platform flash:
#include CYGDAT_DEVS_FLASH_SPI_AT25DFXXX_PLF_CDL
And CYGDAT_DEVS_FLASH_SPI_AT25DFXXX_PLF_CDL is defined in the platform CDL as
done other places:
define_proc {
puts $::cdl_system_header "#define
CYGDAT_DEVS_FLASH_SPI_AT25DFXXX_PLF_CDL
<pkgconf/devs_flash_cortexm_a2f200_eval.h>"
}
What do you think?
Regards,
Christophe
--
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.