This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[Bug 1001561] Internal flash driver for Freescale TWR-K60N512 board


Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001561

--- Comment #16 from Nicolas Aujoux <nau@csm-instruments.com> 2012-05-15 07:22:07 BST ---
(In reply to comment #15)
> (In reply to comment #14)
> > Now that I have Redboot with flash support running in the k60, is there any
> > memory mapping configuration to make in order to be able to load an launch an
> > eCos app via Redboot ?
> > I tried to launch a SRAM startup type eCos application frome a ROM startup type
> > RedBoot application but without success.
> > 
> > Thanks for your help,
> > 
> > Nicolas
> 
> SRAM startup is intended for loading with JTAG. It does complete system
> initialization as ROM startup (twr_k60n512_misc.c). For Redboot you need RAM
> startup. I would recommend to look at TWR-K70F120M platform (just checked in)
> for example. Probably you can make RAM startup with K60 SRAM alone but you may
> have practical limitation with memory resources. We have built a Tower memory
> module with FlexBus RAM (TWR-FXM) with which we can use Redboot.
> 
> I hope this helps
> Ilija

Thanks for you answers.

I just receive an email from the FSF stating that my assignment is complete. Do
I need to do anything now ? 

Nicolas

-- 
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]