eCos Home

RedBoot Home


About eCos

Supported Hardware

Downloading and Installation

Documentation

FAQ

Mailing lists

Problems

Licensing

Anonymous CVS

Contributions and Development Projects

Legal

eCos

Fujitsu SPARClite MB86800-MA01


[an error occurred while processing this directive] [an error occurred while processing this directive]

The Fujitsu SPARClite MB86800-MA01 platform, based on the Fujitsu MB86831, MB86832 or MB86833 is supported by RedBoot. [an error occurred while processing this directive] This port is currently considered to be of Alpha quality only at this time.

[an error occurred while processing this directive]

The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested.

[an error occurred while processing this directive]

Supported devices

Device drivers are included for:

    [an error occurred while processing this directive]
  • Diagnostic (polled) serial I/O [an error occurred while processing this directive]
  • Interrupt-driven serial I/O [an error occurred while processing this directive]
  • Ethernet [an error occurred while processing this directive]
  • FLASH [an error occurred while processing this directive]
  • PCI [an error occurred while processing this directive]
  • USB [an error occurred while processing this directive]
  • PCMCIA/Compact Flash [an error occurred while processing this directive]
  • Keypad [an error occurred while processing this directive]
  • Touchscreen [an error occurred while processing this directive]
  • Timekeeping (real-time clock) [an error occurred while processing this directive]
  • Watchdog [an error occurred while processing this directive]
  • SPI [an error occurred while processing this directive]
  • I2C [an error occurred while processing this directive]
  • ADC [an error occurred while processing this directive]
  • CAN [an error occurred while processing this directive]
  • Framebuffer

Availability

Hardware

It has been reported that this hardware is no longer available. Contact Fujitsu for further details:

Fujitsu Microelectronics Inc, USA
11545 West Bernardo Court, Suite 201
San Diego CA 92127, USA
tel +1 (858) 521-4260

Software

[an error occurred while processing this directive]

Source code for RedBoot is available publically from [an error occurred while processing this directive] the anonymous CVS repository only.

Documentation

[an error occurred while processing this directive]

Specifications are available for the [an error occurred while processing this directive] architecture and [an error occurred while processing this directive] processor and [an error occurred while processing this directive] platform and are available on-line from the manufacturer's web site.

[an error occurred while processing this directive]

Instructions for installing RedBoot on the MB86800-MA01 can be found in the RedBoot User's Guide. [an error occurred while processing this directive] Board specific instructions, including installation instructions can be found here within the User's Guide.

[an error occurred while processing this directive]

Instructions for installing and using eCos on the MB86800-MA01 are available here.

The most recent version of the full documentation set may be found on-line here.

[an error occurred while processing this directive]

RedBoot support

Prebuilt binaries of RedBoot are available for download for both ROM and RAM startup. Some necessary support files may also be included. Consult the RedBoot documentation on how to use these binaries.