[Bug 1000761] eCos support for MPC5xxx MCUs

[bugzilla-daemon at bugs dot ecos dot sourceware dot org]

Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1000761

--- Comment #53 from Stefan Singer <Stefan.Singer@freescale.com> 2012-08-06 16:41:51 BST ---
Hi Jonathan,
I have tried to follow your instructions and all the attachements from today
together form our port for the MPC5xxx family.
We have tried to minimize the impact of our contribution to the generic
packages, however there are a few changes that will be required:

- small changes to the generic PowerPC arch to support VLE Instruction Set
Architecture cores and also some small changes to support some of the newer
e200z0 and C55 e200z4/7 cores
- some small SED script lines accross multiple locations (e.g. memalloc,
rules.mak) to work with MinGW build toolchains. I have seen many requests on
Forums for different architectures, where people were looking for this, so this
should be of generic interest. At this point in time the VLE enabled toolchains
are only available in MinGW build form.

Once you have moved those packages into the repository, could you please add a
text like this on http://ecos.sourceware.org/

"Freescale Qorivva/5xxx Power Architecture port

Freescale has contributed a port of eCos to the Freescale MPC5xxx family of
MCUs. The port is only available from the CVS repository at this time."

Best regards
Stefan

-- 
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.