This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: how to run the program
- To: <Andreas dot Karlsson at combitechsystems dot com>
- Subject: RE: [ECOS] how to run the program
- From: Jesper Skov <jskov at redhat dot com>
- Date: Thu, 31 Aug 2000 11:08:46 +0200 (CEST)
- Cc: jskov at redhat dot com, ecos-discuss at sourceware dot cygnus dot com, aeb at arm dot com
- References: <2253171AF143D21185A60000F8FA748B0229A93C@pluto.combitech.se>
>>>>> "Andreas" == <Andreas.Karlsson@combitechsystems.com> writes:
Andreas> Which CDL file hal_arm_aeb.cdl?
Yes.
Andreas> This can't be the first time. Anyone out there who have done
Andreas> this and want to share experiences? Why inventing the wheel
Andreas> twice?
The eCos build system builds eCos. Application building/linkage
is done by whatever system the user is using. The output image from
that process needs further mangling to be installed in the AEB flash
(due to the AEB rom monitor).
Basically, the process is just more cumbersome than what is also
required for other platforms - on other platforms you may have to
convert the ELF object to binary for EPROM programming, or convert it
to SREC format for downloading and in-situ flash updating.
For the AEB you simply need to do more than just an objcopy. Indeed,
if you are lucky, someone has already written something to simplify
that process. But it is outside the scope of the eCos build system.
Jesper