This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Redboot
- To: "Jonathan Larmour" <jlarmour at redhat dot co dot uk>
- Subject: [ECOS] Redboot
- From: "Anthony Massa" <amassa at san dot rr dot com>
- Date: Sat, 9 Dec 2000 14:45:08 -0800
- Cc: "eCos" <ecos-discuss at sourceware dot cygnus dot com >
- Reply-To: <amassa at san dot rr dot com>
I am trying to get redboot running on my MBX board. I have built the
redboot images. However, the srec image I noticed started at address
0xfe000000. I could not download this image using eppc-bug. So, I used
objcopy with the line from the documentation:
powerpc-eabi-objcopy -O srec --change-address=0x02040000 redboot.img
redboot_mbx.srec.
I then tried to download this new image (redboot_mbx.srec). I cannot see
any output from the serial port or any response from the board.
Can you help me out and let me know what I might be forgetting to do.
Thanks.