This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
connection arm-elf-gdb and EDB7211
- To: ecos-discuss at sources dot redhat dot com
- Subject: [ECOS] connection arm-elf-gdb and EDB7211
- From: Edelmann Thomas <Thomas dot Edelmann at nbgm dot siemens dot de>
- Date: Fri, 16 Feb 2001 11:18:42 +0100
Hi,
I have a problem connecting to the CirrusLogic Evaluationboard EDB7211.
I can download the cygmon.bin via serial line without any problem. But I'm
unbable to get a connection for arm-elf-gdb to the stub.
I'm starting arm-elf-gdb and enter then 'set remotebaud 38400' and 'target
remote /dev/ttyS0'. These commands should open the connection to the board.
When I try afterwards to download my little hello program (specified on the
commandline 'arm-linux-gdb hello') I receive only "Ignoring packet error,
continueing...".
Has anybody the same problem or eventually a solution for the problem.
I don't understand why I can download the stub without a problem but then,
when I try to download a program via gdb, I receive only errors???
Thanks for your help,
Thomas
> ---
> Windows: A 32 bit shell for a 16 bit operating system, originally written
> for
> an 8 bit processor on a 4 bit bus by a 2 bit company that can't stand 1
> bit of
> competition!
> ________________________________________________________
> Thomas Edelmann Siemens AG, A&D GT 13
> * Voice: +49 911/895-2703 Postfach 4848
> * Fax: +49 911/895-3715 D-90327 Nürnberg
> * E-Mail: mailto:Thomas.Edelmann@nbgm.siemens.de
> Visit our Internet-Server at http://www.ad.siemens.de
>
>
>