This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Ecos network stack debugging.
- From: Jonathan Larmour <jlarmour at redhat dot com>
- To: umesh jaiswal <umeshcj at yahoo dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Fri, 04 Jan 2002 01:43:36 +0000
- Subject: Re: [ECOS] Ecos network stack debugging.
- References: <20011228100401.27523.qmail@web13702.mail.yahoo.com>
umesh jaiswal wrote:
>
> Hi All,
>
> I have booted my machine with redboot and connected it
> with the serial interface to linux machine. After
> this I have applied the following command.
>
> gdb target remote /dev ttyS0
>
> After this there is no response from redboot
> Please specify the reason.
Are you sure this is what you typed? This isn't correct. At the GDB prompt
"(gdb)", you should type:
target remote /dev/ttyS0
But before that even, it is recommended to set the serial line speed with:
set remotebaud 38400
assuming it is 38400.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine