ecos-discuss archive
date index for April, 2004

This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

April 30, 2004
22:39 Re: 16-bit vs. 32-bit flash Gary Thomas
22:30 16-bit vs. 32-bit flash Casey Anderson
20:56 RE: Questions on debugging amassa at san dot rr dot com
19:56 Questions on debugging Gatien Gillon
19:51 Re: Help... NewBie (flash device programming on edb7211) jermias perkasa
19:34 Re: Help... NewBie (flash device programming on edb7211) Gary Thomas
19:30 Help... NewBie (flash device programming on edb7211) jermias perkasa
14:33 RE: FTP Support on Redboot Vedaraman Sethuraman (IE10)
14:23 RE: FTP Support on Redboot Gary Thomas
14:20 RE: FTP Support on Redboot Vedaraman Sethuraman (IE10)
14:10 Re: FTP Support on Redboot Gary Thomas
14:05 FTP Support on Redboot Vedaraman Sethuraman (IE10)
13:59 RE: twothread example in redboot. Vedaraman Sethuraman (IE10)
13:46 SIGTRAP when running twothreads example Henrik Mau
13:44 Re: Are eCos gnutools planned to be released with a more recent(>3.2.1) version of libgcc Gregory HEINRICH
11:59 Re: bochs and ecos? David N. Welton
11:45 RE: Adding STLport to eCos Øyvind Harboe
11:44 Re: Adding STLport to eCos Øyvind Harboe
11:25 Re: bochs and ecos? Nick Garnett
10:48 RE: Adding STLport to eCos Yuxin Jiang
10:17 bochs and ecos? Jani Monoses
09:55 Re: General System Monitor question Nick Garnett
09:47 Re: Adding STLport to eCos Alex Schuilenburg
08:44 General System Monitor question J Jordaan
07:11 Adding STLport to eCos Øyvind Harboe

April 29, 2004
15:46 Re: twothread example in redboot. Gary Thomas
15:41 Re: twothread example in redboot. Jani Monoses
15:33 Re: twothread example in redboot. Bart Veer
15:16 Re: Establishing ethernet support, ping failure Kelvin Lawson
14:58 twothread example in redboot. Sai Naidu
14:40 Re: Newbie: looking for minimal systems (HAL only) examples Bart Veer
13:34 Re: Accessing Sockets Bart Veer
12:41 Accessing Sockets Giridhara R P
11:20 packages/net/ppp missing in eCosCentric snapshots Thomas Gellekum
09:53 Ethernet setup problems J Jordaan
08:41 Make signalling routines ISR-safe? Heiko Panther
06:00 Ping test reply Aniket S Joshi
05:48 Re: Establishing ethernet support, ping failure Aniket S Joshi

April 28, 2004
15:50 Are eCos gnutools planned to be released with a more recent(>3.2.1) version of libgcc etienneg
15:08 Newbie: looking for minimal systems (HAL only) examples Daniel Lohmann
13:51 RE: ecos context switch & stack usage question for Sparc platform Ottawa Guy
13:16 Re: [ecos]application compile problem(arm-elf target, linux host) Kelvin Lawson
11:51 Not able to get display Vivek Agarwal
11:29 [ecos]application compile problem(arm-elf target, linux host) 기영택
06:27 Re: Ethernet recv ...NULL buf Bob Koninckx
04:06 about GDB download speed. user new
03:57 about GDB download speed. user new
02:05 Newbie: eCos TCP/IP stack? Sarah

April 27, 2004
22:24 Re: Ethernet recv ...NULL buf Gary Thomas
22:15 Ethernet recv ...NULL buf Bob Koninckx
21:01 How to make Interrupts Edge Sensitive Giri Raja
16:28 RE: ecos context switch & stack usage question for Sparc platform amassa at san dot rr dot com
16:21 Re: ecos context switch & stack usage question for Sparc platform Grant Edwards
16:10 ecos context switch & stack usage question for Sparc platform Ottawa Guy
15:58 Application hangs on ARM Integrator Henrik Mau
15:22 thread spawning Sai Naidu
09:15 Re: dynamic HAL_PLATFORM_* values Nick Garnett
08:57 Re: Once more - Linux synthetic target Bart Veer
04:54 RE: Problem running applications. Breakpoint getting setautomatically at atexit.cxx mohasin.zaki
02:30 Once more - Linux synthetic target Helen Snitkovsky

April 26, 2004
19:52 Help with Interrupts Giri Raja
18:30 Re: Real Time debugging John Newlin
18:26 RE: dynamic HAL_PLATFORM_* values Andy Dyer
15:46 Re: IBM 750FX Gary Thomas
15:27 Real Time debugging Gatien Gillon
14:52 IBM 750FX Rini van Zetten
14:49 problem with am_31 sim + patch Sebastian Fischmeister
13:57 RE: Problem running applications. Breakpoint getting setautomatically at atexit.cxx Gary Thomas
13:27 RE: Problem running applications. Breakpoint getting set automatically at atexit.cxx mohasin.zaki
09:41 Re: Looking for xscale-elf-gcc Bart Veer
09:13 some questions about run-time image Cheng Ping
09:05 Re: Simulator problems on EB40a Jani Monoses
08:58 Re: Problem running applications. Breakpoint getting set automatically at atexit.cxx Nick Garnett
08:55 RE: Simulator problems on EB40a Øyvind Harboe
08:40 RE: Simulator problems on EB40a Robert Cragie
07:30 RE: Problem running applications. Breakpoint getting set automatically at atexit.cxx mohasin.zaki
07:22 Re: Problem running applications. Breakpoint getting set automatically at atexit.cxx mohanlal jangir
06:23 Re: ecos prting in virtex II pro Peter Vandenabeele
06:21 FailSafe Booting with RedBoot Bastos Fernandez Alexandre
06:07 RE: Problem running applications. Breakpoint getting set automatically at atexit.cxx mohasin.zaki
06:07 Looking for xscale-elf-gcc Helen Snitkovsky
06:02 Re: Problem running applications. Breakpoint getting set automatically at atexit.cxx mohanlal jangir
05:58 Problem running applications. Breakpoint getting set automatically at atexit.cxx mohasin.zaki
05:22 Problem in ARM-PID simulator Ashutosh

April 25, 2004
18:54 ecos prting in virtex II pro Lahcen Mejjad
00:04 Re: JFFS2 on ATEB01 Platform Jonathan Larmour

April 24, 2004
17:03 Re: Help! Program stops recognizing IRQ2 interrupts sandeep kumar
08:58 (Solved this problem) RE: RMT Error when trying to do "info threads" on i386 platform mohasin.zaki
08:44 RMT Error when trying to do "info threads" on i386 platform mohasin.zaki
07:18 RE: Simulator problems on EB40a Øyvind Harboe
06:02 How can I make my application to start automatically after system initialization ? mohasin.zaki
06:00 JFFS2 on ATEB01 Platform baljeet singh

April 23, 2004
22:50 Re: Help! Program stops recognizing IRQ2 interrupts Giri Raja
21:18 Re: RE: Fixes to RedBoot "load" command Gary Thomas
20:56 RE: Fixes to RedBoot "load" command Gary Parnes
18:26 RE: Simulator problems on EB40a Gary Thomas
18:21 Re: Help! Program stops recognizing IRQ2 interrupts sandeep kumar
18:11 RE: Simulator problems on EB40a Martin
14:19 Re: How do I view the threads running in my target ? Gary Thomas
14:17 Re: Simulator problems on EB40a Gary Thomas
14:17 Re: How to make the MPC860 target for little endian Gary Thomas
14:13 Re: Help! Program stops recognizing IRQ2 interrupts Gary Thomas
13:17 Re: Establishing ethernet support, ping failure Kelvin Lawson
13:14 How do I view the threads running in my target ? mohasin.zaki
12:52 Re: exit() and lock() Nick Garnett
12:13 exit() and lock() wyb
11:58 Simulator problems on EB40a Martin
11:56 AW: where can i download emulator for eCos Neundorf, Alexander
11:46 where can i download emulator for eCos sabine moulayes
11:46 where can i download emulator for eCos sabine moulayes
07:05 regarding GDB Ashutosh
06:34 How to make the MPC860 target for little endian Venkatadri potluri

April 22, 2004
22:20 Help! Program stops recognizing IRQ2 interrupts Giri Raja
15:56 Re: Problems with ppp and Windows - Checked by AntiVir DEMOvers Øyvind Harboe
15:14 Re: Problems with ppp and Windows - Checked by AntiVir DEMO vers Roland Caßebohm
14:58 Problems with ppp and Windows Øyvind Harboe
12:58 Re: ROMRAM stand-alone application Marco Aurélio da Cruz
12:37 Problems with ppp and Windows Øyvind Harboe
12:02 Re: question on Redboot and CDL template Bart Veer
10:22 Implementation of ethrnet support on Hitachi Sh-7729 H/W Aniket S Joshi
09:34 Re: question on Redboot and CDL template kneep
08:30 Re: question on Redboot and CDL template Bart Veer
07:58 question on Redboot and CDL template kneep
07:08 Re: LCD driver Prabhat Shrivastav
07:04 Hi Prabhat Shrivastav
04:34 Re: Establishing ethernet support, ping failure mohanlal jangir

April 21, 2004
17:42 Re: MPC555 compile error on latest version Gary Thomas
17:24 MPC555 compile error on latest version Dragos Carp
17:04 JFFS2 on ATEB01 platform baljeet singh
13:51 Establishing ethernet support, ping failure Aniket S Joshi
11:42 Re: LCD driver Mikkel Christiansen
11:21 LCD driver Mikkel Christiansen
11:05 duplicate definition of perror() Øyvind Harboe
06:51 Problems with Net+ARM 50 Processor R=FCdiger=20Opper
06:42 Errro while building with openBSD stack Aniket S Joshi
05:20 Re: Enable Network Support for Hitachi Sh-7729 Aniket S Joshi

April 20, 2004
23:16 Re: AT91/EB40 redboot and uCnet daugter board Gary Thomas
23:10 Re: AT91/EB40 redboot and uCnet daugter board Felix Nielsen
20:47 RE: Having trouble building Gary Thomas
19:36 RE: Having trouble building Gary Parnes
17:00 Re: Having trouble building Gary Thomas
16:30 Having trouble building Gary Parnes
15:22 Problems with accept() not awakening upon connection Øyvind Harboe
15:17 Problems with accept() not awakening upon connection Øyvind Harboe
09:45 Re: cs8900a_int_vector Jani Monoses
09:32 Re: Port for Motorola 68EZ328 DragonBall ? John Dallaway
08:10 Port for Motorola 68EZ328 DragonBall ? Jon March

April 19, 2004
21:22 Re: mount -f Gary Thomas
21:01 mount -f Bob Koninckx
15:42 PPP and tftp on EB40a against Windows Øyvind Harboe
15:38 eCos workshop May 28. - announcement Øyvind Harboe
14:48 Re: PPP and tftp on EB40a against Windows Felix
14:10 Re: Enable Network Support for Hitachi Sh-7729 Kelvin Lawson
13:21 Re: Enable Network Support for Hitachi Sh-7729 Aniket S Joshi
13:20 PPP and tftp on EB40a against Windows Øyvind Harboe
12:38 Re: tftp server calls diag_printf() Gary Thomas
12:29 Re: tftp server calls diag_printf() Øyvind Harboe
12:12 Re: tftp server calls diag_printf() Gary Thomas
12:06 Re: tftp server calls diag_printf() Øyvind Harboe
11:48 Re: tftp server calls diag_printf() Gary Thomas
10:43 Re: target connection fails with arm-elf-gdb under windows Felix
10:33 tftp server calls diag_printf() Øyvind Harboe
08:22 Re: Enable Network Support for Hitachi Sh-7729 Kelvin Lawson
03:40 Not able to enable network support on Hitachi 7729 Aniket S Joshi
02:07 help wanted about redboot kneep

April 18, 2004
18:50 AT91/EB40 redboot and uCnet daugter board Felix Nielsen
15:05 hal_us_delay and FREEZE Bob Koninckx
13:29 problems with opcodes (mips1) Sebastian Fischmeister
13:03 Re: cs8900a_int_vector Gary Thomas
13:01 Re: Have the example that use the ecos development raidcontroller?? Gary Thomas
12:15 Have the example that use the ecos development raid controller?? lif
12:14 cs8900a_int_vector Bob Koninckx

April 17, 2004
10:12 Re: Eclipse plugin for editing .ecc files Bart Veer
09:30 Eclipse plugin for editing .ecc files Øyvind Harboe

April 16, 2004
15:47 Re: Help: Redboot on an iPAQ H3870? ipaq medic
15:27 Re: PPP handling of unknown CI configuration requests Nick Garnett
14:44 Re: PPP handling of unknown CI configuration requests Øyvind Harboe
14:27 Re: PPP handling of unknown CI configuration requests Nick Garnett
14:14 Enable Network Support for Hitachi Sh-7729 Aniket S Joshi
13:40 Re: PPP handling of unknown CI configuration requests Øyvind Harboe
13:32 Re: PPP handling of unknown CI configuration requests Nick Garnett
12:26 Re: Re: Help: Redboot on an iPAQ H3870? Gary Thomas
12:20 Re: PPP handling of unknown CI configuration requests Øyvind Harboe
12:17 Re: Help: Redboot on an iPAQ H3870? ipaq medic
12:10 Re: PPP handling of unknown CI configuration requests Øyvind Harboe
11:47 RE: HELP with target.ld file syntax...SOLUTION Robert Cragie
11:22 Re: PPP handling of unknown CI configuration requests Nick Garnett
10:49 PPP handling of unknown CI configuration requests Øyvind Harboe
10:02 Re: PPP calls exit() Nick Garnett
09:37 Re: PPP calls exit() Øyvind Harboe
09:13 Re: PPP calls exit() Nick Garnett
08:21 Re: HELP with target.ld file syntax...SOLUTION Leo McManus
07:20 PPP calls exit() Øyvind Harboe
04:00 newbie question on redboot kneep

April 15, 2004
19:54 Re: HELP with target.ld file syntax...SOLUTION Richard . von . Lehe
18:32 Re: target connection fails with arm-elf-gdb under windows Felix Nielsen
16:15 Re: target connection fails with arm-elf-gdb under windows/ cygnus Gary Thomas
16:05 target connection fails with arm-elf-gdb under windows / cygnus Felix
15:30 Re: images folder should not be downloaded in 'update -d'with '-P ecos' Gary Thomas
15:15 images folder should not be downloaded in 'update -d' with '-P ecos' sandeep kumar
15:13 string constant byte ordering Zhao Luo
14:48 Re: goAhead compiler error Gary Thomas
14:26 goAhead compiler error J Jordaan
12:37 Re: Which gcc should we use for the latest CVS ECOS? Linux HA
11:50 Re: eCosCentric PPP stack memory needs Nick Garnett
11:31 Re: eCosCentric PPP stack memory needs Andrew Lunn
11:17 Re: eCosCentric PPP stack memory needs Felix
10:31 Re: new warning message related to ecos.db with today's updates - fixed sandeep
10:22 Re: new warning message related to ecos.db with today's updates Nick Garnett
10:20 Re: eCosCentric PPP stack memory needs Nick Garnett
10:13 HOW-TO boot eCos from IDE with GRUB on i386 Chris Nimmers
09:57 eCosCentric PPP stack memory needs Felix
09:35 Re: Thread destructors Chris Nimmers
09:32 Re: new warning message related to ecos.db with today's updates sandeep
09:02 RE: newbie jffs2 / nvram question Retallack, Mark (Siemens)
08:32 RE: Change IP during run-time (netmask change ...) Richard Rauch
07:06 Re: Re: Creating UART driver Øyvind Harboe
06:50 Re: Which gcc should we use for the latest CVS ECOS? Andrew Lunn
06:45 Re: Is eCos having this constrains Andrew Lunn
06:12 Is eCos having this constrains Prabhat Shrivastav
03:30 Which gcc should we use for the latest CVS ECOS? Linux HA

April 14, 2004
23:02 Re: Thread destructors Ivan Horvat
22:21 Re: Help: Redboot on an iPAQ H3870? Gary Thomas
22:17 Help: Redboot on an iPAQ H3870? Andreas Heinemann
21:53 newbie jffs2 / nvram question Richard . von . Lehe
21:12 Re: Re: Creating UART driver Sam Pham
18:33 Re: Unsatisfied Conflicts . - kind of solved but some doubts Bart Veer
17:37 Re: HELP with target.ld file syntax...SOLUTION Leo McManus
17:14 Re: Unsatisfied Conflicts . - kind of solved but some doubts Nick Garnett
17:02 Re: SLIP and the eCos net package Nick Garnett
16:52 Re: SLIP and the eCos net package Øyvind Harboe
16:46 Re: Unsatisfied Conflicts . - kind of solved but some doubts sandeep
16:37 Re: Unsatisfied conflicts related to CYGPKG_LIBC_STDIO in configuring eCos. Nick Garnett
16:18 RE: limit on the number of diag_printf(s) ???? Rycerz Roman-G11565
16:12 Re: Conflicts in building ecos for Atmel evaluation board (EB40A) Nick Garnett
16:09 Re: Unsatisfied conflicts related to CYGPKG_LIBC_STDIO in configuring eCos. sandeep
15:52 Re: Change IP during run-time (netmask change ...) sebastien Couret
15:39 PPP Stack Released Nick Garnett
15:23 Conflicts in building ecos for Atmel evaluation board (EB40A) sandeep
15:14 HELP with target.ld file syntax Leo McManus
14:52 Re: SLIP and the eCos net package Nick Garnett
14:38 Re: SLIP and the eCos net package Alex Schuilenburg
14:27 RE: Change IP during run-time Richard Rauch
14:14 Re: SLIP and the eCos net package Jani Monoses
14:10 Re: tftp lwIP and SLIP Jani Monoses
14:07 Re: SLIP and the eCos net package Andrew Lunn
14:04 Re: tftp lwIP and SLIP Andrew Lunn
13:49 SLIP and the eCos net package Øyvind Harboe
13:47 tftp lwIP and SLIP Øyvind Harboe
09:29 spi driver for at91 Michael Jastrebtsoff
09:20 Re: Creating UART driver Nick Garnett
07:28 RE: STLport for eCos Retallack, Mark (Siemens)

April 13, 2004
22:12 Re: Creating UART driver Øyvind Harboe
22:01 STLport for eCos Øyvind Harboe
21:46 Re: Creating UART driver Sam Pham
20:57 What to use instead of pipe? Konstantin Azarov
17:58 Re: JFFS2 on AT91EB01 Andrew Lunn
17:08 JFFS2 on AT91EB01 baljeet singh
15:31 RE: Regarding the installation of eCos amassa at san dot rr dot com
14:27 Re: limit on the number of diag_printf(s) ???? Nick Garnett
13:21 Re: Ecos user guide Andrew Lunn
12:54 Ecos user guide Torbjørn Heltne
11:44 FW: Regarding the installation of eCos Ashutosh
11:30 Regarding the installation of eCos Ashutosh
11:15 RE: Environment Variables Ashutosh
10:03 Re: Environment Variables Bart Veer
09:57 Re: BDI JTAG debugger and threads Øyvind Harboe
07:36 Environment Variables karthik
06:58 Http Server Implementation in Redboot Sai Naidu
05:46 Http Server implementation in Reboot Sai Naidu

April 12, 2004
17:38 RE: limit on the number of diag_printf(s) ???? Rycerz Roman-G11565
17:04 Re: limit on the number of diag_printf(s) ???? Grant Edwards
17:02 Re: limit on the number of diag_printf(s) ???? Bart Veer
16:46 Re: limit on the number of diag_printf(s) ???? Grant Edwards
16:26 Re: limit on the number of diag_printf(s) ???? Bart Veer
16:26 Re: limit on the number of diag_printf(s) ???? Gary Thomas
15:44 limit on the number of diag_printf(s) ???? Rycerz Roman-G11565
11:18 Re: dynamic HAL_PLATFORM_* values Andrew Lunn
08:00 Re: Thread destructors Chris Nimmers
05:45 Re: dynamic HAL_PLATFORM_* values sandeep kumar
03:44 RE: dynamic HAL_PLATFORM_* values Andy Dyer

April 11, 2004
20:07 Re: dynamic HAL_PLATFORM_* values Andrew Lunn
18:31 dynamic HAL_PLATFORM_* values Andy Dyer
12:15 Re: Re: Improved big-endian support Gary Thomas
11:59 Re: Improved big-endian support Andrew Lunn
11:37 Re: ARM Spurious Interrupts & Scheduler locking Andrew Lunn
11:30 Re: Problem in writing to /dev/ttyS1 Andrew Lunn
11:27 Re: ecos newbie question: the stack for interrupt_end() Andrew Lunn
09:30 Re: ROMRAM stand-alone application Andrew Lunn

April 10, 2004
19:52 Re: ecos cme555 help sowmya

April 09, 2004
22:48 Problem in writing to /dev/ttyS1 Giri Raja
22:19 Thank you for your comments! SparkNotes.com
22:18 ARM Spurious Interrupts & Scheduler locking ecos-dev
16:11 RE: ecos license and driver code amassa at san dot rr dot com
09:11 question on redboot kneep
07:08 ecos newbie question: the stack for interrupt_end() wyb

April 08, 2004
23:40 ecos license and driver code Jason Li
13:46 RE: ROMRAM stand-alone application Alan Bowman
13:40 Re: Re: eCosCentric copyright hold in headers Alex Schuilenburg
12:44 Re: ROMRAM stand-alone application John Dallaway
12:31 Re: using the Macraigor Wiggler w/MPC8260 Paul Fine
12:25 RE: ROMRAM stand-alone application Alan Bowman
12:22 Re: eCosCentric copyright hold in headers Jonathan Larmour
12:11 Re: ROMRAM stand-alone application Gary Thomas
12:07 Re: ROMRAM stand-alone application Andrew Lunn
12:07 eCosCentric copyright hold in headers Andrew Lunn
12:07 Re: eCosCentric copyright hold in headers Andrew Lunn
11:48 Re: ROMRAM stand-alone application Nick Garnett
09:16 Re: ROMRAM stand-alone application Nick Garnett
09:09 Re: Synthetic HAL Andrew Lunn
09:03 RE: ROMRAM stand-alone application Gary Thomas
09:00 Re: ROMRAM stand-alone application Gary Thomas
08:55 RE: ROMRAM stand-alone application Alan Bowman
08:52 Re: ROMRAM stand-alone application Andrew Lunn
08:27 Synthetic HAL Daniel Schmidt
08:09 Re: ROMRAM stand-alone application Gary Thomas
07:55 Re: ROMRAM stand-alone application Andrew Lunn
07:35 RE: ROMRAM stand-alone application Alan Bowman
05:31 ROMRAM stand-alone application Marco Aurélio da Cruz

April 07, 2004
21:52 Re: Thread destructors Ivan Horvat
18:23 Re: ecos for 5282 John Dallaway
14:05 Thread destructors Chris Nimmers
13:25 ecos for 5282 Michael McKiernan
12:57 Re: When default_value in CDL? Bart Veer
11:19 Re: POSIX FileIO Andrew Lunn
11:03 AW: POSIX FileIO Neundorf, Alexander
10:33 POSIX FileIO Daniel Schmidt
08:41 Re: gdb, redboot stub, threads Gary Thomas
07:22 Re: RedBoot Question Gary Thomas
04:25 RedBoot Question mohanlal jangir

April 06, 2004
21:16 RE: ecos cme555 help sowmya
21:08 Re: ecos cme555 help sowmya
19:49 Re: JFFS2: Problem in fs-ecos.c Andrew Lunn
19:12 When default_value in CDL? Andrew Lunn
16:41 scheduler question. Ottawa Guy
15:39 RE: ecos cme555 help Rycerz Roman-G11565
14:03 Re: a question on CDL Andrew Lunn
13:55 Re: a question on CDL sandeep kumar
13:23 a question on CDL kneep
08:35 Re: Where's my zlib.h Gary Thomas
08:33 Where's my zlib.h Francesc teixido
07:58 Re: main vs thread Gary Thomas

April 05, 2004
19:24 Re: unable to execute linux kernel with Redboot Mark Salter
17:12 main vs thread Alexandre April
16:15 unable to execute linux kernel with Redboot Jan van de Wijdeven
09:55 RE: Help with Interrupt driven Serial ports in EB40A Robert Cragie
07:21 Re: not within region rom Andrew Lunn
06:25 Multiple Flash Devices Tony Butt
05:33 not within region rom Sai Naidu
04:38 Re: Perhaps I just like pain :-( Chuck McManis
01:58 Perhaps I just like pain :-( Chuck McManis

April 04, 2004
21:14 using the Macraigor Wiggler w/MPC8260 Rajesh Gottlieb
16:29 Share RAM resource help Oscar
04:58 Re: Screen funzies? Gary Thomas
04:45 Re: ecos cme555 help Gary Thomas
04:20 Screen funzies? Chuck McManis

April 03, 2004
19:25 Re: Source tags? Chuck McManis
18:50 Re: eCos for AT91EB01? Daniel Néri
16:35 MCF5272 CDL Problem jmccombs12
16:35 MCF5272 CDL Problem jmccombs12
16:35 MCF5272 CDL Problem jmccombs12
16:33 ecos cme555 help sowmya
10:11 FTP Support on Redboot Vedaraman Sethuraman (IE10)
10:11 File system on Redboot for a compact Flash (IDE Device) Vedaraman Sethuraman (IE10)
09:44 Re: Source tags? Andrew Lunn
09:14 Re: Sementation Fault Giridhara R P
09:01 RE: Re: eCos for AT91EB01? Martin
08:40 Re: Sementation Fault Gary Thomas
08:33 Sementation Fault Giridhara R P
06:44 And speaking of incompatibility Chuck McManis
06:32 Re: Source tags? Chuck McManis
06:21 Re: Source tags? Gary Thomas
06:11 Re: Source tags? Chuck McManis
06:02 Re: Help with Interrupt driven Serial ports in EB40A Gary Thomas
05:46 Re: Source tags? Gary Thomas
05:07 Can someone confirm or deny ... Chuck McManis
04:42 Source tags? Chuck McManis

April 02, 2004
23:27 Re: eCos for AT91EB01? Daniel Néri
22:27 RE: Help with Interrupt driven Serial ports in EB40A Giri Raja
20:24 Re: HAL_VSR_GET error Andrew Lunn
20:17 Re: Interrupt driven serial device drivers in EB40A Andrew Lunn
20:03 Re: Help! VSR Table Andrew Lunn
16:44 Help with Interrupt driven Serial ports in EB40A Giri Raja
16:11 Is there any Net Silicon porting available? Zhao Luo
16:06 Thread-Safe stdio files Kelvin Lawson
15:40 Re: GDB mystery sort of solved Grant Edwards
14:45 Re: BDI JTAG debugger and threads Gary Thomas
14:43 Re: Help! VSR Table Michele Portolan
14:28 RE: Help! VSR Table Robert Cragie
14:05 Help! VSR Table Michele Portolan
14:00 Re: RedBoot & NPE code Mark Salter
13:22 BDI JTAG debugger and threads Øyvind Harboe
12:53 RE: Help with one HAL MAZUR David
12:34 Help with one HAL Legarda Garikoitz
11:12 Re: vector type passed to cyg_drv_interrupt_create Leo McManus
09:56 Re: vector type passed to cyg_drv_interrupt_create Gary Thomas
09:47 vector type passed to cyg_drv_interrupt_create Leo McManus
09:39 HAL_VSR_GET error Michele Portolan
09:38 Question about eb40a, serials ports and flash. Fredrik Öhrström
08:19 Re: GDB Initial breakpoint support for EB40a Daniel Néri
07:58 eCos 1.31 Vs eCos 2.0 Romil Shah
06:38 Re: GDB mystery sort of solved Gary Thomas
06:28 Re: GDB mystery sort of solved Chuck McManis
06:23 Re: GDB mystery sort of solved Gary Thomas
06:17 Re: GDB mystery sort of solved Chuck McManis
06:11 Re: Accessing RS232 port in Linux mohanlal jangir
06:05 Accessing RS232 port in Linux Giridhara R P
05:41 Re: GDB mystery sort of solved Gary Thomas
05:34 GDB mystery sort of solved Chuck McManis
05:28 Re: where is ecosconfig? Chuck McManis
04:39 Re: Disabling RedBoot PCI on IXDP Platform Gary Thomas
04:12 building ecos tools on redhat Brian Hawley
03:53 building ecos tools on redhat Brian Hawley
03:09 Re: interesting, in a negative sort of way Tony Butt

April 01, 2004
23:48 Redboot NMI hook? Charles McManis
23:06 RedBoot & NPE code Herbold, Steve
22:53 RE: Disabling RedBoot PCI on IXDP Platform amassa at san dot rr dot com
22:37 Interrupt driven serial device drivers in EB40A Giri Raja
22:18 Disabling RedBoot PCI on IXDP Platform Herbold, Steve
21:13 What Generates mlt_arm_xscale_ixdp425_rom.h & SDRAM Configuration Herbold, Steve
19:01 Re: Leon mode in eCos Eric Donnat
18:09 gdb, redboot stub, threads Paul D. DeRocco
16:31 About wait queue? shuishuila
15:04 Re: GDB Initial breakpoint support for EB40a Mark Salter
14:40 Re: chdir() is not per thread and JFFS2 unmount Bart Veer
14:36 Re: GDB Initial breakpoint support for EB40a Thomas Koeller
14:12 Re: help wanted for redboot! Mark Salter
13:58 Re: chdir() is not per thread and JFFS2 unmount Øyvind Harboe
13:54 Re: GDB Initial breakpoint support for EB40a Mark Salter
13:51 Leon mode in eCos Michele Portolan
13:40 Re: chdir() is not per thread and JFFS2 unmount Thomas Koeller
13:21 chdir() is not per thread and JFFS2 unmount Øyvind Harboe
13:11 Re: where is ecosconfig? Bart Veer
11:52 Re: where is ecosconfig? Thomas Gellekum
11:24 GDB Initial breakpoint support for EB40a Robin Singh
10:14 help wanted for redboot! kneep
07:44 Re: this gdb error Chuck McManis
07:27 Re: this gdb error Gary Thomas
07:23 this gdb error Chuck McManis
07:17 interesting, in a negative sort of way Chuck McManis
02:18 Re: error in using serial port to update image Gary Thomas
01:33 upload image error using tftp mojo Ma


Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

Mail converted by MHonArc 2.6.3