This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Serial port configuration for RedBoot ouput
- From: "Nicolas Brouard" <nicolas dot brouard at silicomp dot ca>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Tue, 17 Aug 2004 11:36:49 -0400
- Subject: [ECOS] Serial port configuration for RedBoot ouput
Hi,
I'm working on a board with a MPC860. I ported RedBoot in RAM and ROM but I
have no output on my serial port SMC1. With my JTAG debugger, I can see that
RedBoot runs correctly: it goes in the initialize_stub function and then in
the cyg_start function and in the prompt loop.
I think it's almost correct, because when I initialize my board with the
bootloader from Embedded Planet, and then I run my RedBoot, everything is
OK: I have the RedBoot output, and it works fine.
So I suppose that something is not initialized.
Thanks for any pointers
Nicolas
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss