This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: Making eCos Configuration Tool on FreeBSD 6.1

From: Jack Twilley <jmt at twilley dot org>
To: Hans Hübner <hans dot huebner at junger-audio dot com>
Cc: ecos-discuss at ecos dot sourceware dot org
Date: Sat, 23 Sep 2006 23:03:49 -0700
Subject: Re: [ECOS] Making eCos Configuration Tool on FreeBSD 6.1
References: <45161CF3.3080306@twilley.org> <fd2982320609232259u3ca05309s8ae58ca2397b88d@mail.gmail.com>

Hans Hübner wrote:

I would recommend that you use the Linux binary of the configuration
tool.  This will propably be relatively easy to get running (you may
have to hunt for some of the libraries the config tool depends on) and
there are no negative side effects of running Linux binaries on
FreeBSD.

Thanks for the quick response! I'll give that a try as a temporary measure, but is there any hope of building natively? The application I'm using may require an old version of the config tool but I will have to try a few versions first, and this seems like a hard way to do it.

Installing the Linux binary off the website is a quick thing to try, though. Thanks again!

Best regards,
Hans

Jack.

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

References:
- Making eCos Configuration Tool on FreeBSD 6.1
  - From: Jack Twilley
- Re: Making eCos Configuration Tool on FreeBSD 6.1
  - From: Hans Hübner

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]