This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Patch not start network device
- From: Manfred Gruber <m dot gruber at tirol dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 8 Jun 2007 11:10:11 +0200
- Subject: Re: [ECOS] Patch not start network device
- References: <200706071902.39680.m.gruber@tirol.com>
Hi !
Ok I found out it is better to do such things in the network driver, not
generic..
regards manfred
Am Donnerstag, 7. Juni 2007 19:02 schrieb Manfred Gruber:
> Hi !
>
> I have done a small patch to not switch on ethernet if ip is 0.0.0.0 and
> bootp is false in redboot. This speeds up my boot process.
>
> Index: ecos/packages/redboot/current/src/net/net_io.c
> ===================================================================
> --- ecos.orig/packages/redboot/current/src/net/net_io.c
> +++ ecos/packages/redboot/current/src/net/net_io.c
> @@ -701,6 +701,12 @@ net_init(void)
> #endif
> }
> #endif
> + /* not start network if ip address is set to 0.0.0.0 and bootp is
> switched off */
> + if (__local_ip_addr[0] == 0 && __local_ip_addr[1] == 0 &&
> + __local_ip_addr[2] == 0 && __local_ip_addr[3] == 0 && (use_bootp ==
> false)) {
> + diag_printf("Not starting network, bootp is false and IP is
> 0.0.0.0! \n");
> + return;
> + }
> # ifdef CYGDBG_IO_ETH_DRIVERS_DEBUG
> // Don't override if the user has deliberately set something more
> // verbose.
>
> what do you think about that, the patch is against flash_v2 branch ?
>
> regards
> --
> Manfred Gruber
--
mfg
Manfred Gruber
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss