RE: [ECOS] Nand support in Redboot

["viren.dobariya" <viren dot dobariya at aftek dot com>]

Hi, Ross
       I tried eCosCentric NAND tree. 
But it has only few commands like nand info, list, erase and bbt.
I want to write image into NAND flash using redboot.
Is it possible using this package only??

Regards,
Viren  

-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Ross Younger
Sent: Monday, June 14, 2010 8:17 PM
To: ecos
Subject: Re: [ECOS] Nand support in Redboot

viren.dobariya wrote:
>  I am using EA2468 board with samsung nand flash.
> I had written nand flash driver and tested with flash test appn.
> It is working correctly.
> Now, I want to add nand flash support in redboot.
> can anybody guide me?

NAND support for the EA2468, a driver for the on-board Samsung K9F1G08 
(and other related chips), and RedBoot support for NAND (image loading 
via fileio, plus some utility commands) already exists in the 
eCosCentric NAND tree. This is not officially part of eCos but is 
published at http://hg-pub.ecoscentric.com/nand-ecoscentric/ .


Ross

-- 
eCosCentric Ltd, Barnwell House, Barnwell Drive, Cambridge CB5 8UU, UK
Registered in England no. 4422071.                 www.ecoscentric.com

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss





-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss