This is the mail archive of the
mailing list for the eCos project.
RE: Porting eCos to Logic PD Zoom Starter Development Kit (Sharp LH-75401)
- From: Gary Parnes <GaryP at logicpd dot com>
- To: 'Oscar Broekema' <oscar at oacreations dot demon dot nl>, ecos-devel at sources dot redhat dot com
- Date: Mon, 8 Mar 2004 08:59:00 -0600
- Subject: RE: Porting eCos to Logic PD Zoom Starter Development Kit (Sharp LH-75401)
In response to a client's request, I had started work on porting eCos to the
LH-75401 devkit. Unfortunately, the client withdrew their support at a very
early stage of development. Before I had to set things aside, I did manage
to get to the point where I could use LoLo to load and execute a ROMRAM
version of RedBoot (with support for the 91C111 Ethernet controller and the
82510 serial port), which is half the battle, I guess.
The next step would have been to come up with a ROM version that I could
burn onto the board. After that, I probably would worked on getting the
FLASH part recognized.
I have the code, and a tentative stab at package configuration files. I
never checked it in, because I felt it was still a bit "raw". However, if
you'd like to pick up where I left off, I'd be more than happy to hand over
what I have.
SENIOR SOFTWARE ENGINEER
Logic Product Development
411 Washington Ave. North, Suite 101
Minneapolis, MN 55401
Main: (612) 672-9495
Direct: (612) 436-5165
> -----Original Message-----
> From: Oscar Broekema [mailto:email@example.com]
> Sent: Monday, March 08, 2004 4:33 AM
> To: firstname.lastname@example.org
> Subject: Porting eCos to Logic PD Zoom Starter Development Kit (Sharp
> I'm also starting a porting effort to get eCos running on
> using a Sharp LH-75401 core:
> Who is porting eCos too on Logic PD Zoom Starter Development
> Kit (SDK)? Any
> progress on porting?
> --Oscar Broekema
> This message was checked by MailScan for WorkgroupMail.