This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: what amount of RAM is must in target board for eCos
- From: "Morris, Richard" <Richard dot Morris at lifetech dot com>
- To: abhishek srivastava <just_abhi22 at yahoo dot co dot in>
- Cc: ecos discuss <ecos-discuss at sourceware dot org>
- Date: Wed, 3 Oct 2012 11:33:27 -0700
- Subject: Re: [ECOS] what amount of RAM is must in target board for eCos
- References: <1349287737.59969.YahooMailNeo@web193201.mail.sg3.yahoo.com>
We use the ST Micro STM3240G EVAL board and find it quite capable. It has 1M Flash and 192K RAM in two banks 128K + 64K. The address spaces are not adjacent.
The STM32F4 processor family has very flexible timers, better than many other ARM uCs.
On Oct 3, 2012, at 11:08 AM, abhishek srivastava <just_abhi22@yahoo.co.in> wrote:
>
>
> hi all
> i am going to purchase my target processor for eCos as ARM Cortex M3, so a bit worried about its RAM and ROM size requirement when used with eCos.ya, i know,its more application dependent.
> lets say, as per my application, i want to play eCos fullest (while learning eCos) and as main objective, i want to interface graphical LCD (colored) with board (eCos installed) and if possible some GUIs would also go along.
> now for such kind of application, what size of RAM and ROM should be required as i have already tried to do this with LPC2148 with 32K RAM which let me down in past.....as much i know, eCos requires 10K of RAM space as bare minimum.Is it so?
>
>
> please suggest me some suitable board also which is well supported by eCos, possibly ARM.
>
> Thank you
>
>
>
> regards
>
> Abhishek
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss