This is the mail archive of the
mailing list for the eCos project.
[Bug 1001219] Ethernet driver for STM32 connectivity line with port on MMstm32f107 board.
- From: bugzilla-daemon at bugs dot ecos dot sourceware dot org
- To: ecos-patches at ecos dot sourceware dot org
- Date: Mon, 24 Dec 2012 21:45:57 +0000
- Subject: [Bug 1001219] Ethernet driver for STM32 connectivity line with port on MMstm32f107 board.
- Auto-submitted: auto-generated
- References: <firstname.lastname@example.org/>
Please do not reply to this email. Use the web interface provided at:
Jerzy Dyrda <email@example.com> changed:
What |Removed |Added
Attachment #1997|0 |1
is obsolete| |
--- Comment #42 from Jerzy Dyrda <firstname.lastname@example.org> 2012-12-24 21:45:55 GMT ---
Created an attachment (id=2007)
Eth driver for STM32 family.
(In reply to comment #41)
> (In reply to comment #39)
> > Created an attachment (id=1997)
--> (http://bugs.ecos.sourceware.org/attachment.cgi?id=1997) [details]
> > Eth driver for STM32 family.
> > After long time I've gone back to eth driver and now it's works as well on
> > STM32F4 controller.
> > Patch consists only from driver, few extra definitions in
> > packages/hal/cortexm/stm32/var/current/include/var_io_eth and entry in ecos.db
> > Disclaimer:
> > Driver was tested only on Olimex board STM32-E407 what means different
> > connections
> > between PHY and MAC (RMII mode and clock 50 MHz from external generator) than
> > on STM3240G-EVAL.
> Jerzy, it would be of great help for testing if you provide some HAL patch for
I hope that I didnât miss anything. At now I couldn't find no more that type of
MII interface requested by ETH driver - rest stuff like pins configuration,
clocks enabling and so on is done by driver.
Regarding CYGNUM_DEVS_ETH_CORTEXM_STM32_REMAP_PINS option is valid only for F1
family while AFAIK it isn't any stm32_f1 board with Ethernet support in eCos
repo. Thus I left it in driver's cdl without implementing inside the driver. If
you think that the driver should configure it not board dependent part I will
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.