ARM Industrial Module AIM 711

The ARM Industrial Module AIM 711 platform, based on the Samsung S3C4510/KS32C50100 (ARM7TDMI) is supported by both eCos and RedBoot.

The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested.

Supported devices

Device drivers are included for:

• Diagnostic (polled) serial I/O
• Interrupt-driven serial I/O
• Ethernet
• FLASH
• Timekeeping (real-time clock)

Availability

Hardware

Hardware is available from:

Software

Source code for both eCos and RedBoot is available publically from the anonymous CVS repository only.

Documentation

Specifications are available for the processor and platform and are available on-line from the manufacturer's web site.

Instructions for installing RedBoot on the AIM 711 can be found in the RedBoot User's Guide.

Instructions for installing and using eCos on the AIM 711 are available here.

The most recent version of the full documentation set may be found on-line here.

RedBoot support

Prebuilt binaries of RedBoot are available for download for both ROM and RAM startup. Some necessary support files may also be included. Consult the RedBoot documentation on how to use these binaries.