About eCos |
STMicroelectronics STM3240G-EVAL evaluation board[an error occurred while processing this directive] [an error occurred while processing this directive] The STMicroelectronics STM3240G-EVAL evaluation board platform, based on the STMicroelectronics STM32F407IGH6 is supported by RedBoot. [an error occurred while processing this directive] This port is currently considered to be of Alpha quality only at this time. [an error occurred while processing this directive]The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested. [an error occurred while processing this directive]Supported devicesDevice drivers are included for:
AvailabilityHardwareHardware is available from:
STMicroelectronics, Inc. Software[an error occurred while processing this directive]Source code for RedBoot is available publically from [an error occurred while processing this directive] the anonymous CVS repository only. Documentation[an error occurred while processing this directive]Specifications are available for the [an error occurred while processing this directive] architecture and [an error occurred while processing this directive] processor and [an error occurred while processing this directive] platform and are available on-line from the manufacturer's web site. [an error occurred while processing this directive]Instructions for installing RedBoot on the STM3240G-EVAL can be found in the RedBoot User's Guide. [an error occurred while processing this directive] Board specific instructions, including installation instructions can be found here within the User's Guide. [an error occurred while processing this directive]Instructions for installing and using eCos on the STM3240G-EVAL are available here. The most recent version of the full documentation set may be found on-line here. [an error occurred while processing this directive]RedBoot supportPrebuilt binaries of RedBoot are available for download for both ROM and RAM startup. Some necessary support files may also be included. Consult the RedBoot documentation on how to use these binaries. NoteAt the present time, while the board support is fully functional, it does not yet take advantage of the hardware FPU support present in the Cortex-M4. Instead it is treated as a Cortex-M3. ThanksThanks to eCosCentric for their contribution of this board port, STM32 support, and the architectural port. Note that eCosCentric include documentation on their own website for this platform which will not fully correspond to the public eCos support. Thanks to Jerzy Dyrda for the STM32 ethernet driver. |